Xen Minimal OS! start_info: 0xd47000(VA) nr_pages: 0xf0000 shared_inf: 0x7ca94000(MA) pt_base: 0xd4a000(VA) nr_pt_frames: 0xb mfn_list: 0x987000(VA) mod_start: 0x0(VA) mod_len: 0 flags: 0x0 cmd_line: root=/dev/sda ro 4 stack: 0x966780-0x986780 MM: Init _text: 0x0(VA) _etext: 0x7fbc5(VA) _erodata: 0x98000(VA) _edata: 0x9c008(VA) stack start: 0x966780(VA) _end: 0x986d30(VA) start_pfn: d58 max_pfn: 3fffd Mapping memory range 0x1000000 - 0x3fffd000 setting 0x0-0x98000 readonly skipped 0x1000 MM: Initialise page allocator for f50000(f50000)-0(3fffd000) MM: done Demand map pfns at 3fffe000-bfffe000. Heap resides at bffff000-fffff000. Initialising timer interface Initialising console ... done. gnttab_table mapped at 0x3fffe000. Initialising scheduler Thread "Idle": pointer: 0xbffff030, stack: 0x3ff70000 Thread "xenstore": pointer: 0xbffff4a0, stack: 0xf80000 xenbus initialised on irq 1 mfn 0x6ea2f3 Thread "shutdown": pointer: 0xbffff910, stack: 0xf90000 Dummy main: start_info=0x986880 Thread "main": pointer: 0xbffffd80, stack: 0xfa0000 "main" "root=/dev/sda" "ro" "4" vbd 2048 is hd0 ******************* BLKFRONT for device/vbd/2048 ********** backend at /local/domain/0/backend/vbd/1324/2048 Failed to read /local/domain/0/backend/vbd/1324/2048/feature-barrier. Failed to read /local/domain/0/backend/vbd/1324/2048/feature-flush-cache. 41943040 sectors of 0 bytes ************************** Press `ESC' to enter the menu... 0  Booting 'PBX-2.6.18-371.9.1.el5xen' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /vmlinuz-2.6.18-371.9.1.el5xen ro root=/dev/VolGroup00/LogVol00 selinux=0 initrd /initrd-2.6.18-371.9.1.el5xen-xennet.img ============= Init TPM Front ================ Tpmfront:Error Unable to read device/vtpm/0/backend-id during tpmfront initialization! error = ENOENT Tpmfront:Info Shutting down tpmfront close blk: backend=/local/domain/0/backend/vbd/1324/2048 node=device/vbd/2048 Linux version 2.6.18-371.9.1.el5xen (mockbuild@builder17.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue Jun 10 20:24:13 EDT 2014 BIOS-provided physical RAM map: Xen: 0000000000000000 - 00000000f0800000 (usable) 3120MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active ACPI in unprivileged domain disabled Built 1 zonelists. Total pages: 985088 Kernel command line: ro root=/dev/VolGroup00/LogVol00 selinux=0 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0788000 soft=c0768000 PID hash table entries: 4096 (order: 12, 16384 bytes) Xen reported: 1795.673 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000 Memory: 3882416k/3940352k available (2224k kernel code, 48728k reserved, 1042k data, 184k init, 3194888k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4491.07 BogoMIPS (lpj=8982155) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 20480K Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 7076k freed Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) type=2000 audit(1404385757.769:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API alg: No test for crc32c (crc32c-generic) ksign: Installing public key data Loading keyring - Added public key 63D7C2CADE66DCCD - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones brd: module loaded Xen virtual console successfully installed as xvc0 Linux version 2.6.18-371.9.1.el5xen (mockbuild@builder17.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue Jun 10 20:24:13 EDT 2014 BIOS-provided physical RAM map: Xen: 0000000000000000 - 00000000f0800000 (usable) 3120MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active ACPI in unprivileged domain disabled Built 1 zonelists. Total pages: 985088 Kernel command line: ro root=/dev/VolGroup00/LogVol00 selinux=0 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0788000 soft=c0768000 PID hash table entries: 4096 (order: 12, 16384 bytes) Xen reported: 1795.673 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000 Memory: 3882416k/3940352k available (2224k kernel code, 48728k reserved, 1042k data, 184k init, 3194888k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4491.07 BogoMIPS (lpj=8982155) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 20480K Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 7076k freed Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) type=2000 audit(1404385757.769:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API alg: No test for crc32c (crc32c-generic) ksign: Installing public key data Loading keyring - Added public key 63D7C2CADE66DCCD - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones brd: module loaded Xen virtual console successfully installed as xvc0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode XENBUS: Device with no driver: device/vbd/2048 XENBUS: Device with no driver: device/vif/0 XENBUS: Device with no driver: device/console/0 Initalizing network drop monitor service Freeing unused kernel memory: 184k freed Write protecting the kernel read-only data: 403k Red Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Loading xennet.ko module netfront: Initialising virtual ethernet driver. netfront: device eth0 has copying receive path. Loading xenblk.ko module Registering block device major 8 sda: sda1 sda2 Loading ehci-hcd.ko module Loading ohci-hcd.ko module Loading uhci-hcd.ko module USB Universal Host Controller Interface driver v3.0 Loading jbd.ko module Loading ext3.ko module Loading dm-mod.ko module device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com Loading dm-log.ko module Loading dm-mirror.ko module Loading dm-zero.ko module Loading dm-snapshot.ko module Loading dm-mem-cache.ko module Loading dm-region_hash.ko module Loading dm-message.ko module Loading dm-raid45.ko module Device-mapper: dm-raid45: initialized v0.2594l Scanning and configuring dmraid supported devices Scanning logical volumes Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata type lvm2 Activating logical volumes 2 logical volume(s) in volume group "VolGroup00" now active Creating root device. Mounting root filesystem. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys INIT: version 2.86 booting Welcome to PBX build 64078 Press 'I' to enter interactive startup. Setting clock (localtime): Thu Jul 3 12:09:38 BST 2014 [ OK ] Starting udev: udevd[328]: add_to_rules: unknown key 'ATTRS{hardware_id}' udevd[328]: add_to_rules: unknown key 'ATTRS{location}' scsi_id[558]: scsi_id: unable to access parent device of '/block/sda' scsi_id[559]: scsi_id: unable to access parent device of '/block/sda' [ OK ] Loading default keymap (us): [ OK ] Setting hostname localhost.localdomain: [ OK ] Setting up Logical Volume Management: 2 logical volume(s) in volume group "VolGroup00" now active [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00 /dev/VolGroup00/LogVol00: clean, 75310/4685824 files, 860612/4685824 blocks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 /boot: clean, 52/26104 files, 32873/104388 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup Starting monitoring for VG VolGroup00: 2 logical volume(s) in volume group "VolGroup00" monitored [ OK ] Starting dahdi: Loading dahdi framework: FATAL: Module dahdi not found. [FAILED] Waiting for zap to come online...Error: missing /dev/dahdi! [FAILED] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0...DBI connect('dbname=asterisk;','postgres',...) failed: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/lib/perl5/site_perl/5.8.8/Kronos/DBObject.pm line 2 DBI connect('dbname=asterisk;','postgres',...) failed: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/lib/perl5/site_perl/5.8.8/Kronos/DBObject.pm line 2 Subroutine XML::Stream::O_CREAT redefined at /usr/lib/perl5/5.8.8/Exporter.pm line 65. at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/POSIX.pm line 19 Subroutine XML::Stream::O_EXCL redefined at /usr/lib/perl5/5.8.8/Exporter.pm line 65. at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/POSIX.pm line 19 Subroutine XML::Stream::O_RDWR redefined at /usr/lib/perl5/5.8.8/Exporter.pm line 65. at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/POSIX.pm line 19 "my" variable $R6zb8dgeiMqCOvkRXCDftg masks earlier declaration in same scope at /usr/local/fourloop/lib/perl/AGI/Switchvox/Internal/Product.pm line 2. "my" variable $R6zb8dgeiMqCOvkRXCDftg masks earlier declaration in same scope at /usr/local/fourloop/lib/perl/AGI/Switchvox/Internal/Product.pm line 2. "my" variable $R6zb8dgeiMqCOvkRXCDftg masks earlier declaration in same scope at /usr/local/fourloop/lib/perl/AGI/Switchvox/Internal/Product.pm line 2. Scalar value @HFEKQdoid8TRujE0dQGWIw[1] better written as $HFEKQdoid8TRujE0dQGWIw[1] at /usr/local/fourloop/lib/perl/AGI/Switchvox/IVR/Product.pm line 2. Scalar value @MOg3ZnNEOO7yavNo8x3wxA[0] better written as $MOg3ZnNEOO7yavNo8x3wxA[0] at /usr/local/fourloop/lib/perl/AGI/Switchvox/IVR/Product.pm line 2. Constant subroutine __USE_POSIX undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 8. Constant subroutine __USE_POSIX2 undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 9. Constant subroutine __USE_POSIX199309 undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 10. Constant subroutine __USE_POSIX199506 undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 11. Constant subroutine __USE_XOPEN undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 12. Constant subroutine __USE_XOPEN_EXTENDED undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 13. Constant subroutine __USE_UNIX98 undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 14. Constant subroutine __USE_LARGEFILE undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 16. Constant subroutine __USE_LARGEFILE64 undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 17. Constant subroutine __USE_FILE_OFFSET64 undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 18. Constant subroutine __USE_BSD undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 19. Constant subroutine __USE_SVID undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 20. Constant subroutine __USE_MISC undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 21. Constant subroutine __USE_GNU undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 23. Constant subroutine __USE_REENTRANT undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 24. Constant subroutine _POSIX_SOURCE undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 49. Constant subroutine _POSIX_C_SOURCE undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 51. Constant subroutine _XOPEN_SOURCE undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 53. Constant subroutine _XOPEN_SOURCE_EXTENDED undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 55. Constant subroutine _LARGEFILE64_SOURCE undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 57. Constant subroutine _LARGEFILE_SOURCE undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 104. Constant subroutine __USE_ISOC99 undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 108. Constant subroutine __GNU_LIBRARY__ undefined at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/features.ph line 156. Switchvox DB: Connect DBI connect('dbname=asterisk;','postgres',...) failed: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/lib/perl5/site_perl/5.8.8/Kronos/DatabaseBase.pm line 2 Failed to connect to the database.DBI connect('dbname=asterisk;','postgres',...) failed: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/lib/perl5/site_perl/5.8.8/Kronos/DBObject.pm line 2 DBI connect('dbname=asterisk;','postgres',...) failed: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/lib/perl5/site_perl/5.8.8/Kronos/DBObject.pm line 2 Switchvox DB: Connect DBI connect('dbname=asterisk;','postgres',...) failed: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/lib/perl5/site_perl/5.8.8/Kronos/DatabaseBase.pm line 2 Failed to connect to the database.DBI connect('dbname=asterisk;','postgres',...) failed: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/lib/perl5/site_perl/5.8.8/Kronos/DBObject.pm line 2 DBI connect('dbname=asterisk;','postgres',...) failed: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/lib/perl5/site_perl/5.8.8/Kronos/DBObject.pm line 2 DBI connect('dbname=asterisk;','postgres',...) failed: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/lib/perl5/site_perl/5.8.8/Kronos/DBObject.pm line 2 DBI connect('dbname=asterisk;','postgres',...) failed: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/lib/perl5/site_perl/5.8.8/Kronos/DBObject.pm line 2 done. [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting sync_queue_processor: DBI connect('dbname=asterisk;','postgres',...) failed: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/lib/perl5/site_perl/5.8.8/Kronos/DBObject.pm line 2 DBI connect('dbname=asterisk;','postgres',...) failed: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? at /usr/lib/perl5/site_perl/5.8.8/Kronos/DBObject.pm line 2 [ OK ] Starting dhcp_spy: [ OK ] Starting sshd: [ OK ] Starting cups: [ OK ] Starting xinetd: [ OK ] Starting ntpd: [ OK ] Starting postgresql service: [ OK ] Starting dbstall: [ OK ] Starting Dovecot Imap: [ OK ] Switchvox DB: Connect Switchvox DB: select * from access_control_rule Switchvox DB: select * from access_control_rule_service Switchvox DB: select * from access_control_service Switchvox DB: select * from access_control_service Switchvox DB: select * from blocked_ips Switchvox DB: Disconnecting Switchvox DB: Connect Switchvox DB: SELECT * FROM host_addresses WHERE system_record = 't' Switchvox DB: Begin transaction Switchvox DB: UPDATE host_addresses SET network = ?, host = ?, ntp_server = ? WHERE host_address_id = ?[10.20.2.0/24,10.20.2.100,10.20.2.100,2] Switchvox DB: UPDATE host_addresses SET host = null WHERE host_address_id = ?[1] Switchvox DB: Commit transaction Switchvox DB: SELECT server_uuid FROM servers WHERE server_type = 'PRIMARY' Switchvox DB: SELECT mac FROM phone_assignments WHERE configured_by IN ('phone', 'server') AND type = 'assigned' Switchvox DB: Disconnecting Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting httpd: httpd: apr_sockaddr_info_get() failed for ip-10-20-2-100 httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [ OK ] GRANT GRANT Initializing jabberd2 processes ... Starting router: [ OK ] Starting sm: [ OK ] Starting c2s: [ OK ] Starting s2s: [ OK ] Starting ztscan: FATAL: Module dahdi not found. Unable to open /dev/dahdi/ctl: No such file or directory Extracting ZapataConf --Restarting Avahi Failed to kill daemon: No such file or directory --Stopping Phone Proxy --Stopping asterisk --Restarting Zaptel Unloading dahdi hardware drivers:. Removing dahdi module: ERROR: Module dahdi does not exist in /proc/modules [FAILED] Loading dahdi framework: FATAL: Module dahdi not found. [FAILED] Waiting for zap to come online...Error: missing /dev/dahdi! --Bringing Asterisk Backup --Starting Phone Proxy [ OK ] Starting agi_server: Switchvox DB: Connect Switchvox DB: SELECT server_uuid FROM servers WHERE server_type = 'PRIMARY' Switchvox DB: Disconnecting [ OK ] Starting crond: [ OK ] Starting xfs: [ OK ] Starting digium phone configuration daemon: [ OK ] Starting lcd server: [ OK ] Starting MWIchecker server: [ OK ] Starting phone proxy server: Starting traffic_cop server: [ OK ] Starting jabber-api server: [FAILED] Starting atd: [ OK ]